My Cart

DULUX PAINT Weathershield Max A952 Base A 1L Code:A952-A

DULUX PAINT Weathershield Max A952 Base A 1L Code:A952-A

DULUX PAINT Weathershield Max A952 Base A 1L Code:A952-A

  • Brand:Dulux Paint
  • Product Code: PTICI0055
  • Availability: While Stock Last
  • RM43.90

  • Ex Tax: RM43.90

DULUX PAINT Weathershield Max A952-Line Base A;1L;Code:A952-A(DSMXBA 1L/5151613)
-Covers Hairlines Cracks - Its elastic properties allow it to cover hairline cracks and prevent water seepage into exterior walls.
-Colourlock technology - Ensures that the colours on exterior walls stay looking new for longer period of time.
-Keep Cool (TM) - Savings of up to 15% per annum on the energy used to cool your home and reduce exterior surface temperature by up to 5 Degrees Celsius
-Fungus and Algae Resistant - Protection of at least 5 years against fungus and algae growth
-Low VOC - Environmentally Friendly Paint

SURFACE PREPARATION:Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Fungycidal Wash. Make good minor defects with a suitable exterior grade Filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.Note: Do not apply Dulux Weathershield Max Acrylic Exterior Wall Finish during wet weather.
CLEANING UP:Clean all equipment with clean water immediately after use.
SAFETY, HEALTHY AND ENVIRONMENTAL INFORMATION:Keep out of the reach of children.Do not breathe vapour/spray.Use only in well ventilated areas.Safety data sheet available for professional user on request.Avoid contact with skin or eyes.If swallowed seek medical advice immediately and show this container or label.Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.Do not use empty container for storing food.Remove as much paints as possible from brushes and rollers before cleaning.Keep away from food, drinks and animal feed.Store in a cool and shaded place.Container must be in a secure, upright position and be tightly closed.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners.Wear eye/hand protection.Avoid release to environment. Refer to special instructions/Safety data sheet.Do not empty into water course.Dispose of used container in compliance with local regulation.Refer to Dulux Product Safety Data Sheet for further details.In case of emergency, refer to Emergency Incident Response Hotline 1-800-80-6187

Technical Data
Coverage 10-12m² / L
Drying Time Single coat at standard thickness:
No. of Coating Layer 2 coats
Recoat 2 – 3 hours.

Write a review

Please login or register to review